A lot of the documentation for installing on OS X is a little old (OS X has changed a lot when it comes to say, Java, in the last few years) and it seemed a good plan to write up something a bit newer.
I host a Jenkins instance on a hosted Mac mini with Macminicolo. In addition to Yosemite, it’s also got the OS X Server package installed, Open Directory (which is Apple’s name for LDAP) configured and a few other tools. It’s typically used for boxes builds.
I’m assuming you’ll be installing Jenkins via Homebrew as the Jenkins installer does some odd things around how the user is handled. I’m also assuming you’re connected via VNC/Screen Sharing, as often it requires a GUI.
1. Install Java
You likely don’t have Java installed yet, so open a terminal and enter
to request the install. Follow the instructions.
2. Create a user for Jenkins
It’s best to run Jenkins as it’s own user (it can then be limited in the permissions it has), and you’ll want to create a standard (full) user for it.
You can do this through System Preferences, the Server Manager or the command line.
For a local user:
# create an applications group dseditgroup -o create -n . -u username -p -r ‘Applications’ applications # get the id for that group sudo dscl . -read /Groups/applications # find a unique identifier to give the user sudo dscl . -list /Users UniqueID # create the jenkins user sudo dscl . -create /Users/jenkins sudo dscl . -create /Users/jenkins PrimaryGroupID 505 sudo dscl . -create /Users/jenkins UniqueID 1026 sudo dscl . -create /Users/jenkins UserShell /bin/bash sudo dscl . -create /Users/jenkins RealName "Jenkins" sudo dscl . -create /Users/jenkins NFSHomeDirectory /Users/jenkins sudo dscl . -passwd /Users/jenkins # create and set the owner of the home directory sudo mkdir /Users/jenkins sudo chown -R jenkins /Users/jenkins
username with the username of an admin user).
For an Open Directory user (replace the IP with the location of the relevant OD tree):
# create an applications group dseditgroup -o create -n /LDAPv3/127.0.0.1 -u diradmin -p -r ‘Applications’ applications # get the id for that group sudo dscl -u diradmin -p /LDAPv3/127.0.0.1 -read /Groups/applications # find a unique identifier to give the user sudo dscl -u diradmin -p /LDAPv3/127.0.0.1 -list /Users UniqueID # create the jenkins user sudo dscl -u diradmin -p /LDAPv3/127.0.0.1 -create /Users/jenkins sudo dscl -u diradmin -p /LDAPv3/127.0.0.1 -create /Users/jenkins PrimaryGroupID 505 sudo dscl -u diradmin -p /LDAPv3/127.0.0.1 -create /Users/jenkins UniqueID 1026 sudo dscl -u diradmin -p /LDAPv3/127.0.0.1 -create /Users/jenkins UserShell /bin/bash sudo dscl -u diradmin -p /LDAPv3/127.0.0.1 -create /Users/jenkins RealName "Jenkins" sudo dscl -u diradmin -p /LDAPv3/127.0.0.1 -create /Users/jenkins NFSHomeDirectory /Users/jenkins sudo dscl -u diradmin -p /LDAPv3/127.0.0.1 -passwd /Users/jenkins # create and set the owner of the home directory sudo mkdir /Users/jenkins sudo chown -R jenkins /Users/jenkins
You’ll now able to login as the Jenkins user by doing something like:
jenkins -i (this will login as Jenkins with a full user session).
3. Install Jenkins
brew install jenkins as the user you’d normally use
4. Configure the Launch Item
OS X handles services using
launchd and has a few different types for where
they should be placed:
More detail can be found in the Daemons and Services Programming Guide.
In our case, we want to run Jenkins as a
LaunchDaemon as our newly created
jenkins user, so create a
plist file as
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>homebrew.mxcl.jenkins</string> <key>ProgramArguments</key> <array> <string>/usr/bin/java</string> <string>-Dmail.smtp.starttls.enable=true</string> <string>-jar</string> <string>/usr/local/opt/jenkins/libexec/jenkins.war</string> <string>--httpListenAddress=127.0.0.1</string> <string>--httpPort=8080</string> </array> <key>RunAtLoad</key> <true/> <key>UserName</key> <string>jenkins</string> </dict> </plist>
And then load it:
sudo launchctl load
(I’m sticking with the convention for naming as recommended by Hombrew.)
5. Test it out
Now you’ll be able to go to
http://127.0.0.1:8080 (locally) and see Jenkins.
You’ll want to verify that it’s launched with the correct user, which can be
found under “System Info”.
The Launch Daemon specifies that it’ll only listen on
127.0.0.1, so it’s not
possible to access it outside the local machine.
(I’d recommend keeping Jenkins inside an internal network, as it’s executing code on the local machine. Maybe by restricting it like below…)
6. (Optional) Reverse Proxying Apache & Restricting by Networks
It’s likely that you’ll want to access Jenkins at a specific domain and not have to use a separate port. This can be accomplished in lots of ways, but here I’m going to explain Apache as that’s what OS X Server uses by default. If you’re not using OS X Server, either install Apache or another Web Server such as nginx. The steps below configure this using SSL (using this guide), you can cut out much of this if you’d prefer not to.
First, enable “Websites” in Server. It doesn’t need any special configuration for what we’ll be doing.
Next, create a new site from within Server. This will ensure it’s all working in the manner it expects. Here, I’ve restricted it to internal only IPs:
The configuration for “Websites” is held in:
/Library/Server/Web/Config/apache2. There’s a
README which might be helpful
Next, reconfigure the configuration file for the new site (which is an Apache virtualhost):
# /Library/Server/Web/Config/apache2/sites/0000_10.0.0.1_443_jenkins.example.com.conf <VirtualHost 10.0.0.1:443> ServerName jenkins.example.com ServerAdmin email@example.com DocumentRoot "/Library/Server/Web/Data/Sites/jenkins.example.com" DirectoryIndex index.html index.php /wiki/ /xcode/ default.html CustomLog /var/log/apache2/access_log combinedvhost ErrorLog /var/log/apache2/error_log <IfModule mod_ssl.c> SSLEngine On SSLCipherSuite "ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM" SSLProtocol -ALL +TLSv1 SSLProxyEngine On SSLCertificateFile "/etc/certificates/certificate_name.cert.pem" SSLCertificateKeyFile "/etc/certificates/certificate_name.key.pem" SSLCertificateChainFile "/etc/certificates/certificate_name.chain.pem" SSLProxyProtocol -ALL +TLSv1 SSLProxyCheckPeerCN off SSLProxyCheckPeerName off </IfModule> <Directory "/Library/Server/Web/Data/Sites/jenkins.example.com"> Options All -Indexes -ExecCGI -Includes +MultiViews AllowOverride None <IfModule mod_dav.c> DAV Off </IfModule> <IfDefine !WEBSERVICE_ON> Require all denied ErrorDocument 403 /customerror/websitesoff403.html </IfDefine> </Directory> <proxy> Order Deny,Allow Deny from all Allow from 127.0.0.1 Allow from 10.0.0.1/8 Allow from 220.127.116.11 </proxy> ProxyPass / http://127.0.0.1:8080/ nocanon ProxyPassReverse / http://127.0.0.1:8080/ ProxyRequests Off AllowEncodedSlashes NoDecode RequestHeader set X-Forwarded-Proto "https" RequestHeader set X-Forwarded-Port "443" </VirtualHost>
Much of this is the default configuration, with the bottom two additions being the important bit:
<proxy> Order Deny,Allow Deny from all Allow from 127.0.0.1 Allow from 10.0.0.1/8 </proxy> ProxyPass / http://127.0.0.1:8080/ nocanon ProxyPassReverse / http://127.0.0.1:8080/ ProxyRequests Off AllowEncodedSlashes NoDecode RequestHeader set X-Forwarded-Proto "https" RequestHeader set X-Forwarded-Port "443"
…which configures it as a reverse proxy.
Next, restart Apache:
sudo /Applications/Server.app/Contents/ServerRoot/usr/sbin/serveradmin stop web sudo /Applications/Server.app/Contents/ServerRoot/usr/sbin/serveradmin start web
7. (Optional) Configure Users with LDAP
The final step I took was to configure Jenkins’ user support against OS X Server’s Open Directory. This is just LDAP with a different name, and it’s easy to get working.
Under “Manage Jenkins” → “Configure Global Security”, configure the server to the correct name and then fill in the root DN like so:
com make up the hostname of the configured LDAP
server.example.com). This screenshot might help:
Jenkins will be able to configure the rest itself.
8. (Optional) Manage the Jenkins Process with
The default way to manage processes on OS X is using
launchctl, but the
syntax isn’t the easiest to use. For example, restarting Jenkins (something
you’ll want to do each time it’s upgrade):
sudo launchctl unload /Library/LaunchDaemons/homebrew.mxcl.jenkins.plist sudo launchctl load /Library/LaunchDaemons/homebrew.mxcl.jenkins.plist
The alternative is to use brew services, which can make this much easier:
# first, install it: brew tap homebrew/services # then you can view the services: sudo brew services list # restarting: sudo brew services restart jenkins
Before configuring your first set of builds, you’ll likely want to install a set of plugins. I use: